Kitagawa Original Bland Promano
The safety device mechanically ensures the necessary minimum gripping force even if the air pressure drops down.
This is the optional proximity switch bracket to attach proximity switches for jaw open-close confirmation. When selecting "B", 1 set (one open side and one close side each) is attached.
In case that reed switches are needed, they can be attached on the installing grooves on the external body. No additional brackets are needed.
The material of internal seals of grippers is nitrile rubber. If the fluororubber seals are needed, please consult Kitagawa distributor.
Model | Jaw Stroke Diameter (mm) | Gripping Force (Note 1) | Repeatability (mm) | Mass (kg) | Air Consumption per reciprocating (cm3) | Air pressure(Note 2) (MPa) | Operating Temperature (℃) | ||
---|---|---|---|---|---|---|---|---|---|
Measurement Distance L(mm) | OD Gripping (N) | ID Gripping (N) | |||||||
KPH073-2 | 12 | 10 | 200 | 222 | ±0.01 | 0.48 | 7.3 | 0.2?0.8 | 5?60 |
KPH088-2 | 16 | 10 | 348 | 382 | ±0.01 | 0.7 | 16.5 | 0.2?0.8 | 5?60 |
KPH108-2 | 20 | 20 | 536 | 584 | ±0.01 | 1.4 | 31.9 | 0.2?0.8 | 5?60 |
KPH133-2 | 24 | 25 | 817 | 880 | ±0.01 | 2.3 | 59.4 | 0.2?0.8 | 5?60 |
Click the model number and the gripping force diagram will be displayed. The gripping force, F is a product of the actual gripping force per jaw, F1 and the number of jaws (F = F1 x 2)
The gripping force will be calculated by the gripper model, air pressure, and other gripping conditions.
Calculate gripping forceModel | Drawing download | ||
---|---|---|---|
KPH073-2NN (Standard) | DXF | 3D | |
KPH073-2A/CN(with safety device) | DXF | 3D | |
KPH073-2*B(Proximity Switch Bracket) | - | - | 3D |
KPH088-2NN (Standard) | DXF | 3D | |
KPH088-2A/CN (with safety device) | DXF | 3D | |
KPH088-2*B(Proximity Switch Bracket) | - | - | 3D |
KPH108-2NN (Standard) | DXF | 3D | |
KPH108-2A/CN (with safety device) | DXF | 3D | |
KPH108-2*B(Proximity Switch Bracket) | - | - | 3D |
KPH133-2NN (Standard) | DXF | 3D | |
KPH133-2A/CN (with safety device) | DXF | 3D | |
KPH133-2*B(proximity switch brackets) | - | - | 3D |
Wide variety of world’s standard power chuck
High gripping force & stability to suit various requirements
Standard Manual Chucks suit to a high-mixture of work pieces and low-volume production.
High performance Rotary Cylinder is integral to for the operation of a power chuck and extracts the maximum capability of the chuck.
Compact & high accuracy Combination with chuck is available.
Tail stocks, tail spindles, rotary joints, rotary chucks and others
Toggle joint mechanism Long jaw stroke
Stationary power chuck with built-in cylinder
Grippers for industrial robots
Information on discontinued products is posted.