TUX･TU series｜Machine Tool Products

Machine Tool

Top motor type
TUX･TU series

High performance range suitable for 5th axis machining on horizontal machining centres
High rigidity for heavy cutting
High accuracy
Top mounted motor position allows optimal machining area for horizontal 5 axis machining.
Air-hydraulic booster provides high clamping torque
Air-hydraulic booster or direct hydraulic clamping options available
Rotary joint options available
Rotary scale can be fitted to further increase accuracy.

*CE correspondence

Model		TUX200	TUX250	TUX320
Table Diameter (mm)		200	250	320
Register Diameter of Face Plate (mm)		75H7	105H7	130H7
Spindle Through-Hole Diameter (mm)		52	78	110
Centre Height (mm)		140	180	225
Clamping Method		Air-hydraulic / Hydraulic	Air-hydraulic / Hydraulic	Air-hydraulic / Hydraulic
Clamping Torque (N･m) (Pneumatic0.5MPa /Hydraulic3.5MPa)		600	1100	2600
Inertia Converted into Motor Shaft (kg･m²)		0.00055	0.00068	0.00085
Gear Ratio		1/90	1/120	1/120
Max. Spindle Speed (min^-1)		33.3 (motor 3000min^-1)	25 (motor 3000min^-1)	25 (motor 3000min^-1)
Allowable Work Inertia (kg･m²)		0.50	0.98	2.24
Indexing Accuracy (sec)		20	20	20
Repeatability (sec)		4	4	4
Mass of Product (kg)		80	142	200
Allowable Load	Horizontal (kg)	-	-	-
Allowable Load	Vertical (kg)	100	125	180
Manual Tailstock (as an option)		TS200RN	TS250RN	TS320RN
Tail Spindle (as an option)		MSR142A/TSR142A	MSR181A/TSR181A	TSR181A45
Rotary joint (as an option)		RJ40H20V02 Hydraulic/Pneumatic 4 ports	RJ70H25V01 Hydraulic/Pneumatic 6 ports	RJ70H32V01 Hydraulic/Pneumatic 6 ports
Outline Drawing (Kitagawa Own Controller Spec.)	PDF			-
	TIF			-
	DXF			-
	DWG			-
Option Outline Drawing		Tailstock \| Tail Spindle

Model		TU400	TU500
Table Diameter (mm)		400	500
Register Diameter of Face Plate (mm)		180H7	210H7
Spindle Through-Hole Diameter (mm)		154	182
Centre Height (mm)		255	310
Clamping Method		Air-hydraulic / Hydraulic	Air-hydraulic / Hydraulic
Clamping Torque (N･m) (Pneumatic0.45MPa /Hydraulic3.5MPa)		2500	3200
Inertia Converted into Motor Shaft (kg･m²)		0.00293	0.0032
Gear Ratio		1/90	1/120
Max. Spindle Speed (min^-1)		16.6 (motor 1500min^-1)	12.5 (motor 1500min^-1)
Allowable Work Inertia (kg･m²)		5.00	9.38
Indexing Accuracy (sec)		20	20
Repeatability (sec)		4	4
Mass of Product (kg)		350	550
Allowable Load	Horizontal (kg)	-	-
Allowable Load	Vertical (kg)	250	300
Manual Tailstock (as an option)		TS400RN	TS500RN
Tail Spindle (as an option)		Order Production	Order Production
Rotary joint (as an option)		Order Production	Order Production
Outline Drawing	PDF	-	-
	TIF	-	-
	DXF	-	-
	DWG	-	-
Option Outline Drawing		Tailstock \| Tail Spindle