Kitagawa Original Bland Promano
Please install a check valve in the air-pressure circuit so that the gripper will not release a workpiece even if the air pressure drops down.
When the jaw stroke is detected by the reed switches, mount reed switched on the grooves on the outer periphery of the product. Up to 4 reed switches can be mounted.
In case proximity switches are used for direct detection of jaw stroke, please purchase proximity switch brackets additionally.
The material of internal seals of grippers is nitrile rubber. If the fluororubber seals are needed, please consult Kitagawa distributor.
|Gripping Force (Note 1)||Repeatability|
Click the model number and the gripping force diagram will be displayed. The gripping force, F is a product of the actual gripping force per jaw, F1 and the number of jaws (F = F1 x 2)
Wide variety of world’s standard power chuck
High gripping force & stability to suit various requirements
Necessary item for Quality control and Safety
Standard Manual Chucks suit to a high-mixture of work pieces and low-volume production.
High performance Rotary Cylinder is integral to for the operation of a power chuck and extracts the maximum capability of the chuck.
Compact & high accuracy Combination with chuck is available.
Tail stocks, tail spindles, rotary joints, rotary chucks and others
Toggle joint mechanism Long jaw stroke
Stationary power chuck with built-in cylinder
Kitagawa's original grippers with high-quality and high-durability
Information on discontinued products is posted.