Machine Tool
<Note> If the chuck is installed upward, please consult us.
| Model | NRC04 | NRC06 | NRC08 | NRC10 | |
|---|---|---|---|---|---|
| Plunger Stroke (mm) | 15 | 15 | 15 | 15 | |
| Jaw Stroke (in dia.) (mm) | 5.2 | 5.2 | 6.3 | 6.3 | |
| Static Gripping force (kN) (at air pressure 0.6Mpa) |
2.5 | 7 | 10.8 | 16 | |
| Max. Air Pressure (MPa) | 0.7 | 0.7 | 0.7 | 0.7 | |
| Matching Soft Top Jaw | SJ04B1 | SJ06B1 | SJ08B1 | SJ10A1 | |
| Gripping Diameter (mm) | Max. | 110 | 165 | 210 | 254 |
| Min. | 10 | 23 | 30 | 50 | |
| Max. Rotation Speed (min-1) | 100 | 72 | 60 | 53 | |
| Rotating Torque (N･m) | 9.8 | 9.8 | 9.8 | 9.8 | |
| Mass of Product (kg) (with standard soft jaws) |
10 | 22 | 27.7 | 42.5 | |
| Outline Drawing | 2D |  |
|
|
|
 |
|
|
|
||
 |
|
|
|
||
| 3D |  |
|
|
|
|
 |
|
|
|
||
Note) The 3D data represents the jaw positions at the fully open (UC), the appropriate open end (HOL), the centre of stroke (HCL), the appropriate closed end (HUL) and fully closed (OC) end for both Parasolid and STEP.
Jaw stroke
Wide variety of world’s standard power chuck
High gripping force & stability to suit various requirements
Standard Manual Chucks suit to a high-mixture of work pieces and low-volume production.
Necessary item for Quality control and Safety
High performance Rotary Cylinder is integral to for the operation of a power chuck and extracts the maximum capability of the chuck.
Compact & high accuracy Combination with chuck is available.
Tail stocks, tail spindles, rotary joints, rotary chucks, Dedicated controller and others
Toggle joint mechanism Long jaw stroke
Stationary power chuck with built-in cylinder
Kitagawa's original grippers with high-quality and high-durability
Strongly support factory automation and unmanned operation
Various catalogues can be downloaded.
Various flyers can be downloaded
Information on discontinued products is posted.
