Machine Tool
*CE correspondence
* Since 2 additional axis controlled NC rotary tables fall under the list controlled items of Export Trade Control Ordinance of Japan, Permission for Export by the Ministry of Economy, Trade and Industry is required before exporting from Japan.
| Model | TT101 | TW120 | |
|---|---|---|---|
| Tilting Angle | -20°～+120° | -20°～+110° | |
| Table Diameter (mm) | 110 | 125 | |
| Register Diameter of Face Plate (mm) | 50H7 | 60H7 | |
| Spindle Through-Hole Diameter (mm) | 32 | 32 | |
| Centre Height (mm) | 140 | 150 | |
| Clamping Method | Pneumatic | Pneumatic | |
| Clamping Torque (N･m) at Pneumatic 0.5 MPa | Rotating axis | 180 | 120 |
| Tilting axis | 300 | 200 | |
| Inertia Converted into Motor Shaft (kg･m2) | Rotating axis | 0.000082 | 0.000072 |
| Tilting axis | 0.000081 | 0.000034 | |
| Gear Ratio | Rotating axis | 1/72 | 1/90 |
| Tilting axis | 1/120 | 1/180 | |
| Max. Spindle Speed | Rotating axis (min-1 / motor 3000 min-1) | 41.6 | 33.3 |
| Tilting axis(min-1 / motor 3000 min-1) | 25 | 16.6 | |
| Allowable Work Inertia (kg･m2) | 0.05 | 0.06 | |
| Indexing Accuracy (sec) | Rotating axis | 30 | 30 |
| Tilting axis | 60 | 60 | |
| Repeatability (sec) | 4 | 4 | |
| Mass of Product (kg) | 65 | 105 | |
| Allowable Load | at horizontal (kg) | 35 | 35 |
| at tilted (kg) | 20 | 20 | |
| Built-in Rotary joint (as an option) | RJ32-10T05 Hydraulic/Pneumatic 3 ports |
RJ32-12T08 Hydraulic/Pneumatic 3 ports |
|
| Outline Drawing (Kitagawa Own Controller Spec.) |  |
|
|
| TIF |  |
|
|
| DXF |  |
|
|
| DWG |  |
|
|
| Model | TT140 | TT150 | |
|---|---|---|---|
| Tilting Angle | -110°～+110° | -20°～+110° | |
| Table Diameter (mm) | 140 | 150 | |
| Register Diameter of Face Plate (mm) | 60H7 | 60H7 | |
| Spindle Through-Hole Diameter (mm) | 32 | 40 | |
| Centre Height (mm) | 200 | 150 | |
| Clamping Method | Pneumatic | Pneumatic | |
| Clamping Torque (N･m) at Pneumatic 0.5 MPa | Rotating axis | 280 | 350 |
| Tilting axis | 500 | 550 | |
| Inertia Converted into Motor Shaft (kg･m2) | Rotating axis | 0.000269 | 0.000242 |
| Tilting axis | 0.000288 | 0.000132 | |
| Gear Ratio | Rotating axis | 1/72 | 1/72 |
| Tilting axis | 1/180 | 1/180 | |
| Max. Spindle Speed | Rotating axis (min-1 / motor 3000 min-1) | 41.6 | 41.6 |
| Tilting axis(min-1 / motor 3000 min-1) | 16.6 | 16.6 | |
| Allowable Work Inertia (kg･m2) | 0.12 | 0.14 | |
| Indexing Accuracy (sec) | Rotating axis | 30 | 30 |
| Tilting axis | 60 | 60 | |
| Repeatability (sec) | 4 | 4 | |
| Mass of Product (kg) | 150 | 141 | |
| Allowable Load | at horizontal (kg) | 50 | 50 |
| at tilted (kg) | 30 | 30 | |
| Built-in Rotary joint (as an option) | RJ32TT140 Hydraulic/Pneumatic 4 ports |
RJ40FTT150 Hydraulic/Pneumatic 4 ports + Pneumatic exclusive 1 port |
|
| Outline Drawing (Kitagawa Own Controller Spec.) | |
|
|
| TIF | |
|
|
| DXF | |
|
|
| DWG | |
|
|
| Model | TT182/TW182 | TT200 | |
|---|---|---|---|
| Tilting Angle | -35°～+110° | -35°～+110° | |
| Table Diameter (mm) | 180 | 200 | |
| Register Diameter of Face Plate (mm) | 65H7 | 65H7 | |
| Spindle Through-Hole Diameter (mm) | 40 | 40 | |
| Centre Height (mm) | 180 | 180 | |
| Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | |
| Clamping Torque (N･m) (Pneumatic0.5MPa/Hydraulic3.5MPa) | Rotating axis | 450 | 600 |
| Tilting axis | 800 | 1200 | |
| Inertia Converted into Motor Shaft (kg･m2) | Rotating axis | 0.000242 | 0.000225 |
| Tilting axis | 0.000135 | 0.000125 | |
| Gear Ratio | Rotating axis | 1/90 | 1/90 |
| Tilting axis | 1/180 | 1/180 | |
| Max. Spindle Speed | Rotating axis (min-1 / motor 3000 min-1) | 33.3 | 33.3 |
| Tilting axis(min-1 / motor 3000 min-1) | 16.6 | 16.6 | |
| Allowable Work Inertia (kg･m2) | 0.25 | 0.3 | |
| Indexing Accuracy (sec) | Rotating axis | 20 | 20 |
| Tilting axis | 60 | 60 | |
| Repeatability (sec) | 4 | 4 | |
| Mass of Product (kg) | 155 / 170 | 170 | |
| Allowable Load | at horizontal (kg) | 60 | 60 |
| at tilted (kg) | 40 | 40 | |
| Built-in Rotary joint (as an option) | RJ40FTT182 Hydraulic/Pneumatic 4 ports +Pneumatic exclusive 1 port |
RJ40FTT200 Hydraulic/Pneumatic 4 ports +Pneumatic exclusive 1 port |
|
| Pneumatic Outer Cylinder (as an option) | NY1312T18B | NY1312T18B | |
| Hydraulic Outer Cylinder (as an option) | NY0912T18A | NY0912T18A | |
| Outline Drawing (Kitagawa Own Controller Spec.) | |
|
|
| TIF | |
|
|
| DXF | |
|
|
| DWG | |
|
|
| Model | TT251/TW251 | TT321/TW321 | |
|---|---|---|---|
| Tilting Angle | -35°～+110° | -35°～+110° | |
| Table Diameter (mm) | 250 | 320 | |
| Register Diameter of Face Plate (mm) | 100H7 | 135H7 | |
| Spindle Through-Hole Diameter (mm) | 70 | 110 | |
| Centre Height (mm) | 225 | 255 | |
| Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | |
| Clamping Torque (N･m) (Pneumatic0.45MPa/Hydraulic3.5MPa) | Rotating axis | 900 | 2600 |
| Tilting axis | 1200 | 2600 | |
| Inertia Converted into Motor Shaft (kg･m2) | Rotating axis | 0.00070 | 0.00083 |
| Tilting axis | 0.00054 | 0.00046 | |
| Gear Ratio | Rotating axis | 1/90 | 1/180 |
| Tilting axis | 1/180 | 1/360 | |
| Max. Spindle Speed | Rotating axis (min-1 / motor 3000 min-1) | 33.3 | 16.6 |
| Tilting axis(min-1 / motor 3000 min-1) | 16.6 | 8.3 | |
| Allowable Work Inertia (kg･m2) |
0.78 | 1.92 | |
| Indexing Accuracy (sec) | Rotating axis | 20 | 20 |
| Tilting axis | 45 | 45 | |
| Repeatability (sec) | 4 | 4 | |
| Mass of Product (kg) | 260 / 270 | 350 / 360 | |
| Allowable Load | at horizontal (kg) | 100 | 150 |
| at tilted (kg) | 60 | 100 | |
| Rotary joint (as an option) | RJ70H25T02 Hydraulic/Pneumatic 6 ports |
RJ70H32T03 Hydraulic/Pneumatic 6 ports |
|
| Outline Drawing (Kitagawa Own Controller Spec.) | |
|
|
| TIF | |
|
|
| DXF | |
|
|
| DWG | |
|
|
Wide variety of world’s standard power chuck
High gripping force & stability to suit various requirements
Necessary item for Quality control and Safety
Standard Manual Chucks suit to a high-mixture of work pieces and low-volume production.
High performance Rotary Cylinder is integral to for the operation of a power chuck and extracts the maximum capability of the chuck.
Compact & high accuracy Combination with chuck is available.
Tail stocks, tail spindles, rotary joints, rotary chucks and others
Toggle joint mechanism Long jaw stroke
Stationary power chuck with built-in cylinder
Kitagawa's original grippers with high-quality and high-durability
Information on discontinued products is posted.
