TR(X) series｜Machine Tool Products

Machine Tool

Side motor type (vertical mounting)
TR(X) series

TR(X) series

High performance range for machining large work pieces
High rigidity for heavy cutting
Hydraulic clamping method
High accuracy
Rotary joint available
Large through-hole
Rotary scale can be fitted to further increase accuracy

*CE correspondence

Product Specifications

IMPORTANT: Sales of the TR400 and TL400 will be discontinued once current stock has sold out. The MK400 will replace these models.

For further details of the MK400, please refer to the relevant product page.

Model			TLX320･TRX321	TR400(TL)	TR500(TL)	TR630
Right-handed Type			○	Order production	Order production	Order production
Left-handed Type			○	Order production	Order production	×
Table Diameter (mm)			ø320	ø400	ø500	ø630
Centre Hole Diameter (mm)			ø135H7	ø180H7	ø200H7	ø280H7
Through Hole Diameter (mm)			ø110	ø150	ø170	ø250
Centre Height (mm)			225	255	310	400
Clamping Method			Air-hydraulic / Hydraulic	Air-hydraulic / Hydraulic	Air-hydraulic / Hydraulic	Air-hydraulic / Hydraulic
Clamping Torque (N・m) (at hydraulic 3.5MPa)			2600	2500	3200	4000
Motor Axis Reduced Inertia (kg・m²)			0.00085	0.0028	0.0028	0.0064
Servomotor (for Fanuc spec.)			αiF 8/3000-D	αiF 12/4000-D	αiF 12/4000-D	αiF 22/3000-D
Total Reduction Ratio	4th axis spec. (Fanuc spec.)		1/120	1/180	1/180	1/180
Total Reduction Ratio	M signal spec.		1/180	1/180	1/180	1/180
Max. Rotation Speed (min^-1)	4th axis spec. (Fanuc spec.)		25 (at motor 3000min^-1)	11.1 (at motor 2000min^-1)	11.1 (at motor 2000min^-1)	11.1 (at motor 2000min^-1)
Max. Rotation Speed (min^-1)	M signal spec.		16.6 (at motor 3000min^-1)	11.1 (at motor 2000min^-1)	11.1 (at motor 2000min^-1)	8.3 (at motor 1500min^-1)
Allowable Work Inertia (kg・m²)			4.48	10.00	18.73	49.62
Indexing Accuracy (sec)			20	20	20	20
Repeatability (sec)			4	4	4	4
Mass of Product (kg)			181	350	550	900
Allowable Load	Horizontal (kg)		350	500	600	1000
Allowable Load	Vertical (kg)		180 (360)^Note)	250 (500)^Note)	300 (600)^Note)	400 (800)^Note)
Manual Tailstock （Option）			TS320RN	TS400RN	TS500RN	TS630RN
Tail Spindle （Option）			TSR181A45 TSR181H45	Order Production	Order Production	Order Production
Rotary Joint （Option）			RJ70H32K02 Hydraulix / Pneumatic 6 ports	Order Production	Order Production	Order Production
Outline Drawing	Kitagawa own controller spec.	2D		-	-	-
				-	-	-
				-	-	-
		3D				-
		3D				-
	4th axis spec. (Fanuc spec.)	2D		-	-	-
				-	-	-
				-	-	-
		3D
		3D
Option Outline Drawing			Tailstock Tail Spindle	Tailstock	Tailstock	Tailstock