|Table Diameter (mm)||165|
|Register Diameter of Face Plate (mm)||50H7|
|Spindle Through-Hole Diameter (mm)||40|
|Centre Height (mm)||140|
|Clamping Torque (N･m)
at Pneumatic 0.5 MPa
|Inertia Converted into Motor Shaft (kg･m2)||0.00023|
|Max. Spindle Speed
|Allowable Work Inertia (kg･m2)||0.25|
|Indexing Accuracy (sec)||40|
|Mass of Product (kg)||43|
|Allowable Load||Horizontal (kg)||80|
|Manual Tailstock (as an option)||MR160RN|
|Tail Spindle (as an option)||MSR142A/TSR142A|
|Rotary joint (as an option)||RJ40H16P01
Hydraulic/Pneumatic 4 ports
(Kitagawa Own Controller Spec.)
|Tailstock | Tail Spindle|
Wide variety of world’s standard power chuck
High gripping force & stability to suit various requirements
Necessary item for Quality control and Safety
Standard Manual Chucks suit to a high-mixture of work pieces and low-volume production.
High performance Rotary Cylinder is integral to for the operation of a power chuck and extracts the maximum capability of the chuck.
Compact & high accuracy Combination with chuck is available.
Tail stocks, tail spindles, rotary joints, rotary chucks and others
Toggle joint mechanism Long jaw stroke
Stationary power chuck with built-in cylinder
Grippers for industrial robots
Information on discontinued products is posted.