Machine Tool
*CE correspondence
| Model | MRT200 | ||
|---|---|---|---|
| Table Diameter (mm) |
ø202 |
||
| Centre Hole Diameter (mm) | ø65H7 | ||
| Through Hole Diameter (mm) | ø45 | ||
| Centre Height (mm) | 140 | ||
| Clamping Method | Pneumatic | ||
| Clamping Torque (N･m) (at 0.5 MPa) |
350 | ||
| Motor Axis Reduced Inertia (kg･m2) | 0.00017 | ||
| Servomotor (for Fanuc spec.) | αiF 4/5000-B | ||
| Total Reduction Ratio | 1/90 | ||
| Max. Rotation Speed (min-1) | 33.3 (at motor 3000min-1) |
||
| Allowable Work Inertia (kg･m2) | 1.00 | ||
| Indexing Accuracy (sec) | 20 | ||
| Repeatability (sec) | 4 | ||
| Mass of Product (kg) | 70 | ||
| Allowable Load | Horizontal (kg) | - | |
| Vertical (kg) | 100 | ||
| Manual Tailstock (as an option) | MR200RN | ||
| Tail Spindle (as an option) | MSR142A/TSR142A | ||
| Rotary Joint (as an option) | RJ40H20Q02 Hydraulic/Pneumatic 4 ports |
||
| Outline Drawing | Kitagawa Own Controller Spec. | 2D |  |
 |
|||
 |
|||
 |
|||
| 3D |  |
||
 |
|||
| 4th axis spec. (FANUC spec.) |
3D | |
|
|
|||
| Option Outline Drawing | Tailstock | Tail Spindle | ||
Wide variety of world’s standard power chuck
High gripping force & stability to suit various requirements
Necessary item for Quality control and Safety
Standard Manual Chucks suit to a high-mixture of work pieces and low-volume production.
High performance Rotary Cylinder is integral to for the operation of a power chuck and extracts the maximum capability of the chuck.
Compact & high accuracy Combination with chuck is available.
Toggle joint mechanism Long jaw stroke
Stationary power chuck with built-in cylinder
Tail stocks, tail spindles, rotary joints, rotary chucks and others
Kitagawa's original grippers with high-quality and high-durability
Strongly support factory automation and unmanned operation
Various catalogues can be downloaded.
Various flyers can be downloaded
Information on discontinued products is posted.
