kitagawa

Language

Machine Tool

Side motor type (horizontal mounting)
TMX series

High performance range with high rigidity for heavy cutting

TMX series	ズーム

TMX series

  • High accuracy
  • Built-in air-hydraulic booster provides high clamping torque.
  • Air-hydraulic booster or direct hydraulic clamping option available.
  • Built-in rotary joint available
  • Can be used vertically and horizontally
  • Rotary scale can be fitted to further increase accuracy.

*CE correspondence

Product Specifications

ModelTMX160TMX200TMX250
Right-handed Type
Left-handed Type ×
Table Diameter (mm) ø165 ø200 ø250
Centre Hole Diameter (mm) ø50H7 ø75H7 ø105H7
Through Hole Diameter (mm) ø40 ø52 ø78
Centre Height (mm) 120 140 180
Clamping Method

Hydraulic/
Pneumatic

Hydraulic/
Pneumatic

Hydraulic/
Pneumatic

Clamping Torque (N・m)
(at Pneumatic0.5MPa/Hydraulic3.5MPa)
450 600 1100
Motor Axis Reduced Inertia (kg・m2) 0.00012 0.00032 0.00056
Total Reduction Ratio 1/72 1/90 1/90
Max. Rotation Speed
(min-1)
41.6
(at motor 3000min-1)
33.3
(at motor 3000min-1)
33.3
(at motor 3000min-1)
Allowable Work Inertia (kg・m2) 0.51 1.00 1.95
Indexing Accuracy (sec) 20 20 20
Repeatability (sec) 4 4 4
Mass of Product (kg) 56 60 101
Allowable LoadHorizontal (kg) 160 200 250
Vertical (kg) 80 100 125
Manual Tailstock (as an option) TS160RN TS200RN TS250RN
Tail Spindle (as an option) TSR121A MSR142A/TSR142A MSR181A/TSR181A
Rotary Joint (as an option) RJ40H16D01
Hydraulic/Pneumatic 4 ports
RJ40H20D03
Hydraulic/Pneumatic 4 ports
RJ70H25D05
Hydraulic/Pneumatic 6 ports
Outline DrawingKitagawa own controller spec.2D
3D
4th axis spec.
(Fanuc spec.)
3D
Option Outline Drawing Tailstock | Tail Spindle

Machine Tool product lineup

PAGE TOP