Machine Tool
Model | MR120 | MR160 | MR200 | |
---|---|---|---|---|
Table Diameter (mm) | 128 | 165 | 202 | |
Register Diameter of Face Plate (mm) | 50H7 | 50H7 | 65H7 | |
Spindle Through-Hole Diameter (mm) | 32 | 40 | 45 | |
Centre Height (mm) | 120 | 140 | 140 | |
Clamping Method | Pneumatic | Pneumatic | Pneumatic | |
Clamping Torque (N・m) at Pneumatic 0.5 MPa |
150 | 310 | 350 | |
Inertia Converted into Motor Shaft (kg・m2) | 0.00004 | 0.00008 | 0.00017 | |
Gear Ratio | 1/60 | 1/72 | 1/90 | |
Max. Spindle Speed (min-1) | 50 (motor3000min-1) |
41.6 (motor3000min-1) |
33.3 (motor3000min-1) |
|
Allowable Work Inertia (kg・m2) | 0.22 | 0.51 | 1.00 | |
Indexing Accuracy (sec) | 20 | 20 | 20 | |
Repeatability (sec) | 4 | 4 | 4 | |
Mass of Product (kg) | 33 | 41 | 61 | |
Allowable Load | Horizontal (kg) | 120 | 160 | 200 |
Vertical (kg) | 60 | 80 | 100 | |
Manual Tailstock (as an option) | MR120RN | MR160RN | MR200RN | |
Tail Spindle (as an option) | TSR121A | MSR142A/TSR142A | MSR142A/TSR142A | |
Rotary joint (as an option) | RJ32-12Q04 Hydraulic/Pneumatic 3 ports |
RJ40H16Q Hydraulic/Pneumatic 4 ports |
RJ40H20Q02 Hydraulic/Pneumatic 4 ports |
|
Outline Drawing (Kitagawa Own Controller Spec.) | ![]() ![]() |
![]() ![]() |
![]() ![]() |
|
TIF | ![]() ![]() |
![]() ![]() |
![]() ![]() |
|
DXF | ![]() ![]() |
![]() ![]() |
![]() ![]() |
|
DWG | ![]() ![]() |
![]() ![]() |
![]() ![]() |
|
Option Outline Drawing |
Tailstock | Tail Spindle |
Model | MR250 | MR320 | ||
---|---|---|---|---|
Table Diameter (mm) | 250 | 320 | ||
Register Diameter of Face Plate (mm) | 100H7 | 130H7 | ||
Spindle Through-Hole Diameter (mm) | 70 | 105 | ||
Centre Height (mm) | 180 | 225 | ||
Clamping Method | Pneumatic | Pneumatic | ||
Clamping Torque (N・m) at Pneumatic 0.5 MPa |
600 | 1200 | ||
Inertia Converted into Motor Shaft (kg・m2) | 0.00031 | 0.00031 | ||
Gear Ratio | 1/90 | 1/120 | ||
Max. Spindle Speed (min-1) | 33.3 (motor 3000min-1) |
16.6 (motor 2000min-1) |
||
Allowable Work Inertia (kg・m2) | 1.95 | 4.49 | ||
Indexing Accuracy (sec) | 20 | 20 | ||
Repeatability (sec) | 4 | 4 | ||
Mass of Product (kg) | 85 | 130 | ||
Allowable Load | Horizontal (kg) | 250 | 350 | |
Vertical (kg) | 125 | 180 | ||
Manual Tailstock (as an option) | MR250RN | MR320RN | ||
Tail Spindle (as an option) | MSR181A/TSR181A | TSR180A-45 | ||
Rotary joint (as an option) | RJ70H25Q02 Hydraulic/Pneumatic 6 ports |
RJ70H32Q01 Hydraulic/Pneumatic 6 ports |
||
Outline Drawing (Kitagawa Own Controller Spec.) | ![]() ![]() |
![]() ![]() |
||
TIF | ![]() ![]() |
![]() ![]() |
||
DXF | ![]() ![]() |
![]() ![]() |
||
DWG | ![]() ![]() |
![]() ![]() |
||
Option Outline Drawing |
Tailstock | Tail Spindle |
Wide variety of world’s standard power chuck
High gripping force & stability to suit various requirements
Necessary item for Quality control and Safety
Standard Manual Chucks suit to a high-mixture of work pieces and low-volume production.
High performance Rotary Cylinder is integral to for the operation of a power chuck and extracts the maximum capability of the chuck.
Compact & high accuracy Combination with chuck is available.
Tail stocks, tail spindles, rotary joints, rotary chucks and others
Toggle joint mechanism Long jaw stroke
Stationary power chuck with built-in cylinder
Kitagawa's original grippers with high-quality and high-durability
Information on discontinued products is posted.