Machine Tool
| Model | RS100 | ||
|---|---|---|---|
| Right-handed Type | Order production | ||
| Left-handed Type | Order production | ||
| Table Diameter (mm) | ø105 | ||
| Centre Hole Diameter (mm) | ø50H7 | ||
| Through Hole Diameter (mm) | ø32 | ||
| Centre Height (mm) | 110 | ||
| Clamping Method | Pneumatic | ||
| Clamping Torque (N･m) (at 0.5 MPa) |
80 | ||
| Total Reduction Ratio | 1/36 | ||
| Max. Rotation Speed(min-1) (at motor 3000min-1) |
83.3 | ||
| Allowable Work Inertia (kg･m2) | 0.054 | ||
| Indexing Accuracy (sec) | 50 | ||
| Repeatability (sec) | 10 | ||
| Mass of Product (kg) | 23 | ||
| Allowable Load | Horizontal (kg) | 60 | |
| Vertical (kg) | 30 (60) Note 2) | ||
| Manual Tailstock (as an option) | RS100RN | RS100LN | |
| Outline Drawing (Kitagawa own controller spec.) |
 |
 |
|
| TIF | |
|
|
| DXF | |
|
|
| DWG | |
|
|
| Option Outline Drawing |
Tailstock | ||
Wide variety of world’s standard power chuck
High gripping force & stability to suit various requirements
Standard Manual Chucks suit to a high-mixture of work pieces and low-volume production.
Necessary item for Quality control and Safety
High performance Rotary Cylinder is integral to for the operation of a power chuck and extracts the maximum capability of the chuck.
Compact & high accuracy Combination with chuck is available.
Tail stocks, tail spindles, rotary joints, rotary chucks, Dedicated controller and others
Toggle joint mechanism Long jaw stroke
Stationary power chuck with built-in cylinder
Kitagawa's original grippers with high-quality and high-durability
Strongly support factory automation and unmanned operation
Various catalogues can be downloaded.
Various flyers can be downloaded
Information on discontinued products is posted.
